Filter
Top Products
Adjusting the Camera Settings
HP PhotoSmart C500 Digital Camera User’s Guide 44
You can also change the flash settings using the camera menus.
To select a flash setting using the camera menus:
To select a flash setting using the camera menus:To select a flash setting using the camera menus:
To select a flash setting using the camera menus:
1. Turn the camera on and turn the camera mode dial to Rec
RecRec
Rec.
2. Press the Menu
MenuMenu
Menu button.
3. Use the 4-way arrow button to scroll to the Preferences
PreferencesPreferences
Preferences menu, then scroll
down to Capture
CaptureCapture
Capture.
4. Press the Edit
EditEdit
Edit button (left soft key).
5. Scroll to Flash
FlashFlash
Flash.
6. Use the 4-way arrow button to select a flash setting. See the table above for information about each of the flash
settings.
Note: You cannot use the flash for Burst photos. If you choose a flash setting from the menu but you are
taking Burst photos, the setting will not be effective until you take your next Still or Timelapse photo.
7. Press the Exit
ExitExit
Exit button (right soft key) twice to save the settings and exit the menus.
Tip: To conserve battery power, turn the color LCD off after you choose the setting.