Filter
Top Products
12 HP Photosmart M407 User’s Manual
1 With the Battery/Memory card door
open, insert the memory card in the
small slot below the batteries, with
the notched side of the card going in
first, as shown. The card only fits one
way; do not force it. Make sure the
memory card snaps into place.
2 Close the Battery/Memory card door
by pushing the door down and
sliding the door toward the top of the
camera until the door latches.
To remove the memory card from the
camera, first turn the camera off. Then open the Battery/
Memory card door, press down on the top edge of the memory
card, and it will spring outward from the slot.
Turning on Power
Turn the camera on by sliding the ON/OFF switch to the
right and then releasing it.
The lens extends and the Power light to the left of the ON/
OFF
switch turns on solid green. The HP logo also displays on
the Image Display as the camera powers up.