Filter
Top Products
● Set the camera to Macro, Auto Macro, Normal, or Infinity focus and
try taking the picture again (see Using the focus range settings on page 14).
●
Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
● Check Image Advice for specific tips (see Image Advice under Using the Playback
Menu on page 27).
My image is too bright.
● Turn the flash off (see Setting the flash on page 16).
● Move back from the subject and use zoom.
● Adjust Exposure Compensation (see Exposure Compensation under Using the
Capture Menu on page 20).
● Use Bracketing for exposure (see Bracketing under Using the Capture Menu
on page 20).
● Check Image Advice for specific tips (see Image Advice under Using the Playback
Menu on page 27).
My image is too dark.
● Wait for natural lighting conditions to improve, use the flash (see Setting the flash
on page 16) or add indirect lighting.
● Adjust Exposure Compensation (see Exposure Compensation under Using the
Capture Menu on page 20).
● Use Bracketing for exposure (see Bracketing under Using the Capture Menu
on page 20).
● Use Adaptive Lighting (see Adaptive Lighting under Using the Capture Menu
on page 20).
● Use the Spot setting for AE Metering (see AE Metering under Using the Capture
Menu on page 20).
● Check Image Advice for specific tips (see Image Advice under Using the Playback
Menu on page 27).
My image is grainy.
● Use a lower ISO Speed setting (see ISO Speed under Using the Capture Menu
on page 20.
● Add indirect lighting, use the flash (see Setting the flash on page 16), or wait for
natural lighting conditions to improve.
● If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
● Use Image Advice (see Image Advice under Using the Playback Menu
on page 27).
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory.
The Power light is on but the Image Display is off, or the camera seems stuck and
won’t operate.
●
Press Live View/Playback
to reactivate the Image Display.
● Reset the camera (see Resetting the camera on page 43 ).
HP Photosmart R927 Digital Camera 45