Filter
Top Products
Configuration
Document 800-05056 Rev C 37
11/09
Note If the image cannot be displayed properly because of your PC’s
specifications, lower the drawing mode level.
Note While in the Fast Drawing mode, the drawing speed might
decrease when the RASplus screen is not located on the primary
monitor.
Note The Overlay Drawing mode may not be supported, depending
on the type of video card installed in your PC. Video cards with
an ATI chipset are recommended.
Note When using dual monitors, select Overlay Drawing to display
the image only on the primary monitor.
Note With some computers, the image drawing speed might decrease
while using a deinterlace filter, depending on the type of
deinterlace filter.
Note With some computers, the image drawing speed might decrease
when the Anti-Aliasing Screen option is selected.
• OSD Setup…: Select options (Title, Time Info, Date Info, Text-In and Overlay
Text-In Data) to display on the screen.
• Load Default Map at Startup: Select whether or not the user-defined map file is
loaded automatically when RASplus starts, and designate the path of the map file
(.rmp) to load.
Recording Setup Set up the use (On or Off) of the panic recording function and
overwriting option of the recording folder (On or Off). When using the panic recording
function and overwriting option, RASplus continues recording when the hard disk drive