Honeywell 800-05056 Security Camera User Manual


 
Configuration
Document 800-05056 Rev C 39
11/09
System 2 Tab
Set up the modem connection information for remote access, system password,
network option, report function and DVRNS server.
Figure 3-21 Setup Screen — System 2
Dial-up Network Select Use Modem if you want to use a modem for remote access.
Security Option Designate whether password confirmation is required Before Setup,
Before Startup, or Before Shutdown of RASplus. Click Change to change the
password.
Network Option Set up the IP port number (from 8000 to 12000) that is used for
network connection when receiving a callback message from a remote site.
Note The IP port number you enter should match the value set during
the network setup of the remote DVR.
Event Setup Enter the number of emergency events that are displayed in the
Emergency Event panel. Set up RASplus to sound when events are detected by
selecting events from the list and designating the sound file (.wave) path. You can set
up a different sound for each type of event.