Filter
Top Products
Rev 3 12 G-113077-002
01/07
English
Connecting the Camera
1. Connect the VIDEO connector on the rear of the
camera to the video-in connector on your monitor.
2. Connect the camera to a power supply appropriate for
your installation.
HCC334L/X, HCC484L/LX: 12 VDC or 24 VAC power
supply
HCC335LX, HCC485LX: 230V power supply
3. Plug in the power supply. The power (PWR) LED
illuminates to show that the camera is receiving power.
If it does not illuminate, check the connections and the
power source.
Figure 7 Camera Connections
PUSH
LOCK
IRIS
LEVEL V-PH
PWR
VIDEO
L/L
INT
VSD
DC
ME
AI
BLC
FL
AGC
WB3
WB2
WB1
EE
AES
OFF
GND
DC 12V
AC 24V
Monitor
Power LED
Low voltage model shown
(HCC334L/X, HCC484L/X)