Filter
Top Products
Document 800-00031 Rev A 13
04/08
Connecting the Wiring
Follow Figure 5 to connect the video and power wires.
Figure 5 Wiring Connection
Adjusting the Camera
To adjust the HD4U/X Camera:
1. Apply 12 VDC or 24 VAC power to the camera and monitor the video signal.
2. Loosen the screws that lock the gimbal assembly in place (see Figure 6).
3. Adjust the camera carrier to the desired view.
4. Tighten the screws to lock the gimbal assembly in place.
Note Orient the camera as shown in Figure 6 to maintain the correct picture orientation.
Red+
Black –
Power
Video: female BNC
Note For secure installations,
surface-mounted cables should
be protected by plastic or metal
cable covers.