Honeywell IPCAM-WI Security Camera User Manual


 
iP Cameras Online Help Guide
– 1 –
This guide covers the operation of Honeywell's iP Cameras for use with the Total Connect website. The various cameras
each have different features that can be controlled from the Total Connect website. When a particular camera is
selected, only the operating switches for that model camera will appear. Refer to the topics at the end of this
guide for details on the tool buttons and how to set your preferences for each camera. The table below highlights the
features of each internet camera model:
Camera Features
POWER
NETWORK
iPCAM-WI Camera
Wired or Wireless
Fixed Lens
Video Motion Detection
iPCAM-PT Camera
Wired or Wireless
Fixed Lens
Video Motion Detection
Pan and Tilt with presets
Aux Lighting
1
After logging into Total Connect, click Video.
2
From the drop-down menu, choose the video system you want to view. Click Launch Video System.
If your PC does not have QuickTime® and Flash® You will be prompted to install or update these
applications.
Note: After approximately
30-minutes of inactivity, the
Video session will time out
and disconnect.