JVC 0503-FO-ID-VP Camcorder User Manual


 
58 EN
Master Page: Left-Heading0
USING THE REMOTE CONTROL UNIT
The Full-Function Remote Control Unit can operate
this camcorder from a distance as well as the basic
operations (Playback, Stop, Pause, Fast-Forward and
Rewind) of your VCR. It also makes additional
playback functions possible. (pg. 59)
Installing The Batteries
The remote control uses two “AAA (R03)” size
batteries. Refer to “General Battery Precautions”
(pg. 78).
1 Remove the battery compartment cover while
pushing up the tab as illustrated.
2 Insert two “AAA (R03)” size batteries in the
correct direction.
3 Re-attach the battery compartment cover.
Beam Effective Area (indoor use)
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is
5 m (16 ft).
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor is
directly exposed to sunlight or powerful lighting.
Buttons And Functions
A Infrared beam transmitting window
Transmits the beam signal.
The following buttons are available only when the
camcorder’s Power Switch is set to “P”.
B DISPLAY Button (pg. 27, 54, 63)
C SHIFT Button (pg. 59, 62)
D SLOW Rewind/Forward Buttons ( pg. 59)
Left/Right Buttons (pg. 59)
E REW Button
•Rewind/Reverse Shuttle Search on a tape
(pg. 25)
•Displays previous file in a memory card
(pg. 29)
F FADE/WIPE Button (pg. 64)
G EFFECT ON/OFF Button (pg. 60)
H EFFECT Button (pg. 60)
I PAUSE IN Connector (pg. 63)
J MBR SET Button (pg. 62)
K Up Button (pg. 59)
INSERT Button (pg. 61)
L Down Button (pg. 59)
A. DUB Button (pg. 60)
M PLAY Button
•Starts Playback of a tape (pg. 24)
•Starts Auto Playback of images in a memory
card (pg. 29)
N FF Button
•Forward/Forward Shuttle Search on a tape
(pg. 25)
•Displays next file in a memory card
(pg. 29)
O STOP Button
•Stops the tape (pg. 24)
•Stops Auto Playback (pg. 29)
P PAUSE Button
Pauses the tape (pg. 59)
Q R.A.EDIT Buttons (pg. 62 – 66)
The following buttons are available when the
camcorder’s Power Switch is set to “A” or “M”.
a Zoom (T/W) Buttons
Zoom in/out (pg. 22, 59)
(Also available with the Power Switch set to
P”)
b START/STOP Button
Functions the same as the Recording Start/Stop
Button on the camcorder.
c SNAPSHOT Button
Functions the same as SNAPSHOT on the
camcorder.
1
3
2
+
+
Tab
Insert the minus (–) end first.
Remote sensor
GR-HD1US_07Advanced.fm Page 58 Monday, April 14, 2003 8:15 PM