JVC 1105ASR-NF-VM Camcorder User Manual


 
EN 15
GETTING STARTED
MasterPage: Start_Right
GETTING STARTED
1 Set the Power Switch to REC while pressing
down the Lock Button located on the switch.
2 Make sure the LCD monitor is closed and
locked. Pull out the viewnder fully and adjust it
manually for best viewability.
3 Turn the Diopter Adjustment Control until the
indications in the viewnder are clearly focused.
CAUTION:
When retracting the viewnder, take care not to
pinch your ngers.
1 Set the Power Switch
to REC or PLAY while
pressing down the Lock
Button located on the
switch.
2 Open the LCD monitor
fully. ( pg. 18)
To adjust the brightness of
the viewnder, pull out the
viewnder fully and set
PRIORITY to FINDER
( pg. 22, 24).
3 Press MENU. The
Menu Screen appears. If
you are in Playback mode,
please proceed to Step 5.
4 Press 3 or 4 to select DISPLAY, and press
SET or 2. The DISPLAY Menu appears.
5 Press 3 or 4 to select BRIGHT, and press
SET or 2. The Menu Screen closes and the
brightness control menu appears.
6 Press 3 or 4 until the appropriate brightness
is reached and press SET or 2.
7 Press MENU. The menu screen closes.
To attach the camcorder
to a tripod, align the
direction stud and screw
to the mounting socket
and stud hole on the
camcorder. Then tighten
the screw clockwise.
Some tripods are not
equipped with studs.
Viewfinder Adjustment
Diopter Adjustment Control
Example:
Brightness Adjustment Of The
Display
Tripod Mounting
1BRIGHT
11
11
22
22
MENU
44
44
33
33
GR-D350UC.book Page 15 Wednesday, October 19, 2005 1:51 PM