JVC 1208YDR-YG-MD Camcorder User Manual


 
32
Menus Settings: [ ] = Factory-preset
WB
Adjusts the white balance
to achieve the optimum
colors for the amount of
light in your surroundings
during recording.
@
[AUTO]: White balance is adjusted automatically.
3 MANUAL :
B MWB: Adjusts the white balance manually depending on the
light source.
1) Hold a sheet of plain white paper in front
of the subject so that the white paper fills
the screen.
2) Keep touching the
OK button until the
B indicator starts blinking then stops
blinking.
D FINE: When shooting outdoors on a sunny day.
E CLOUD: When shooting outdoors on a cloudy day.
F HALOGEN: When a video light or similar type of lighting is
used.
PHOTOMETRY AREA
Enables you to adjust the
brightness in the desired
spot when backlight
compensation does not
work well.
6 [WHOLE SCREEN]: Brightness is adjusted automatically for
whole screen.
7 SPOT: Brightness for the specified spot is adjusted
automatically.
w EFFECT
Enables you to record
videos or still images with
special effects.
1
[OFF]: No effect is used.
J SEPIA: The image has a brownish tint like old still images.
B/W MONOTONE: The image becomes black and white like old
movies.
L CLASSIC FILM*: This effect skips frames to give images of an
old movie atmosphere.
M STROBE*: The image looks like a series of consecutive
snapshots.
* ! mode only.
t TELE MACRO
Enables you to shoot
a subject as large as
possible at a distance of
approx. 50 cm (1.64 ft).
1
[OFF]: Disables the function.
0
ON: Activates the function.
NOTE
Set [TELE MACRO] to [OFF] if you will not take close-up still
images.
Non-close-up still images will be blurred if [TELE MACRO] is set to
[ON].
WB
Manual Recording (Continued)