JVC 1208YDR-YG-MD Camcorder User Manual


 
66
Warning Indications
Indication Action
SET DATE/TIME!
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult
your nearest JVC dealer.
COMMUNICATING ERROR
Be sure to use JVC battery packs.
NOT FORMATTED
Select [OK] and select [YES] to perform formatting.
FORMAT ERROR!
Check the operating procedure, and perform once again.
Turn off the camcorder, and turn it on again.
DATA DELETION ERROR
BUILT-IN MEMORY ERROR!
Turn off the camcorder, and turn it on again.
If the problem persists, backup all data, and then perform
formatting (All data is deleted).
MEMORY CARD ERROR!
Turn off the camcorder, and turn it on again.
Remove and re-insert the SD card (MultiMediaCard cannot be
used).
Remove any dirt from the SD card terminals.
Insert the SD card before switching the power on.
Turn off the camcorder, and turn it on again.
If the problem persists, backup all data, and then perform
formatting (All data is deleted).
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
Stop video recording, and then record a still image. (If an SD
card is removed or inserted during video recording, a still
image cannot be recorded.)
RECORDING CANCELLED
Set [REC MEDIA FOR VIDEO] to [SD Card], then record to an
SD card.
Turn off the camcorder and then turn it on again.
RECORDING FAILURE
Turn off the camcorder, and turn it on again.
USE AC ADAPTER
Use the AC Adapter as power supply.