JVC ENLYT1127-001A Camcorder User Manual


 
EN
13
TAPE RECORDING
Power Switch Position
:
Allows you to set various recording functions using the
Menus. If you want more creative capabilities than Full
Auto recording, try this mode.
(Full Auto):
Allows you to record using NO special effects or manual
adjustments. Suitable for standard recording.
OFF:
Allows you to switch off the camcorder.
PLAY:
Allows you to play back a recording on the tape.
Allows you to access data stored on the memory card
or to transfer still/moving images stored on the
memory card to a computer.
VIDEO/MEMORY Switch Position
VIDEO:
• Allows you to record on a tape or play back a tape.
If “REC SELECT” is set to “
/ ” in the DSC
Menu Screen, still images are recorded on the
memory card as well.
• Zoom magnification over 10X (GR-DX300) or 16X
(GR-DX95/DX75) is available ( pg. 13, 32).
MEMORY:
Allows you to record on a memory card or access data
stored on a memory card.
Journalistic Shooting
In some situations, different shooting angles may
provide more dramatic results. Hold the camcorder in
the desired position and tilt the LCD monitor in the
most convenient direction. It can rotate 270° (90°
downward, 180° upward).
Self-Recording
You can shoot yourself while viewing your own image in
the LCD monitor. Open the LCD monitor and tilt it
upward 180° so that it faces forward, then point the
lens toward yourself and start recording.
Operation Mode
Choose the appropriate operation mode according to
your preference using the Power Switch @ and VIDEO/
MEMORY Switch t.
Zooming
To produce the zoom in/out effect, or an instantaneous
change in image magnification.
Zoom In
Turn the Power Zoom (SHUTTLE SEARCH) Ring
#
clockwise.
Zoom Out
Turn the Power Zoom (SHUTTLE SEARCH) Ring #
counterclockwise.
The further you turn the Power Zoom Ring # the
quicker the zoom action.
NOTES:
Focusing may become unstable during Zooming. In this
case, set the zoom while in Record-Standby, lock the
focus by using the manual focus (
pg. 30), then zoom
in or out in Record mode.
Zooming is possible to a maximum of 500X (GR-DX300)
or 700X (GR-DX95/DX75), or it can be switched to 10X
(GR-DX300) or 16X (GR-DX95/DX75) magnification
using the optical zoom (
pg. 32).
Zoom magnification of over 10X (GR-DX300) or 16X
(GR-DX95/DX75) is done through Digital image
processing, and is therefore called Digital Zoom.
During Digital zoom, the quality of image may suffer.
Digital zoom cannot be used when the VIDEO/MEMORY
Switch
t is set to “MEMORY” ( “VIDEO/MEMORY
Switch Position”).
Macro shooting (as close as approx. 5 cm to the subject)
is possible when the Power Zoom Ring
# is turned all
the way clockwise. Also see “TELE MACRO” in the Menu
Screen on page 33.
t
#
@
Power-Linked Operation
When the Power Switch @ is set to “ ” or “ ”, you can
also turn on/off the camcorder by opening/closing the LCD
monitor or pulling out/pushing in the viewfinder.