JVC GCWP10AUS Camcorder User Manual


 
14
Getting Started
Charging the Battery
1
Turn off the camcorder by pressing the button( ) for about
1 second.
The power lamp goes out.
2
Turn on the computer and connect to the camcorder( ).
CHARGE STATUS
Charge Lamp
Blinks: Charging
Goes out: Charging finished
Charging Time Approx. 3 h
You can confirm the remaining battery level by touching
the screen (for about 1 second) during charging. (You
cannot confirm the level when the battery is extremely
low.)
When the charging is finished, disconnect the
camcorder from the computer.
NOTE
The charging time is when the camcorder is charged at 25°C (77 °F).
If the battery is charged outside the room temperature range of 10 °C (50 °F) to 35 °C
(95 °F), charging may take a longer time or it may not start. The recordable and
playable time may also be shortened under some usage conditions such as at low
temperature.
Charging is not possible while the camcorder is turned on.
GC-WP10
GC-FM2