Filter
Top Products
Getting Started
3
Insert the memory card
1. Slide the latch and open the cover.
2. Insert the SD card (Optional) into the slot until
it locks properly.
3. To remove the SD card, press inward to release
it and gently pull it out.
2
Charge the Li-ion battery
1. A blinking light will indicate active charging.
2. In adapter charging mode, the full charging time
for a depleted battery is about 5 hours and the
light will turn off automatically after the charging
is completed.
3. In PC USB charging mode, a longer charging
time is required.
1
Load the battery
1. Slide the latch and open the cover.
2. Insert the battery according to the correct
polarity marks (+ or -).
How to set the clock
1. Press the MENU button
2. Select [Time Setting] and then press
/
for Year, Month, Day, Hour, and Minute.
3. P
ress [SET ] to go for next.
Guide
1. Connect the camera to a computer.
2. Open [WiVideo ] Drive, then double click
[Start.pdf]
Note: Adobe Reader must be installed to read PDF
Supported SD card
-Panasonic -TOSHIBA -SanDisk
PC USB
charging mode
1
2
3
Adapter charging mode
(Please use JVC
authenticated adapter
AC-V10LU)
Using one with an output higher
than 5 V risks breakdown.