JVC GR DV 3 Camcorder User Manual


 
10 EN
1
INSERT CHARGED BATTERY
To insert a battery pack, slide the battery lock
switch to the release position and insert the
battery
end first. To prevent the battery
pack from falling out, be sure to slide the
battery lock switch to the lock position.
2
ATTACH TO CAMCORDER
Insert the Battery Holder’s nub into the
mounting socket on the bottom of the
camcorder and slide the camcorder lock lever
to the lock position.
•To detach the camcorder, press the release
button on the lock lever and slide the lock
lever to the release position. Then slide the
battery lock switch to the release position.
NOTES:
When the battery remaining power indicator appears
as
, that means the battery power is close to nil.
When the battery power is exhausted, power turns
off automatically.
Each time you start shooting, the camcorder chooses
the battery pack that has more remaining power, and
uses that as the power supply. That means both
battery packs will be exhausted at roughly the same
time.
GETTING STARTED
(Cont.)
1
CONNECT DC CORD TO CAMCORDER
Insert the coupler of the provided DC cord into
the camcorder.
2
CONNECT DC CORD TO AC
CHARGER STATION
Connect the DC cord to the AC Charger
Station’s DC OUT jack.
Indoor Use
When using the camcorder indoors, you can use the AC Charger Station (provided) instead of a battery.
Using The Battery Holder
For extended use, prepare the Battery Holder (CU-V615U), which can be loaded with one battery pack. This
Battery Holder can be used together with the battery installed in the camcorder.
3
SUPPLY POWER TO AC CHARGER
STATION
Plug the AC Charger Station’s power cord into
an AC outlet.
NOTE:
Since the AC Charger Station processes electricity
internally, it becomes warm during use. Be sure to use
it only in well-ventilated areas.
Camcorder
connector
Nub
Camcorder lock lever
(with release button)
Battery lock switch
Battery
Mark
Power lamp
When power is supplied,
the power lamp lights.
AC Charger Station
AA-V60EK
Slide down the open switch.
To AC outlet
Power cord
DC cord
To DC OUT jack
Coupler
Remove.
Core filter