JVC GR DV 3 Camcorder User Manual


 
EN 55
Red
White
Yellow Yellow
White
Red
VIDEO/AUDIO
cable (provided)
VCR
Core filter
To S-VIDEO IN
connector
To AUDIO OUT
connectors (L/R)
To AUDIO IN
connectors (L/R)
To
TV or VCR
TV
Core filter
To S-VIDEO OUT
connector
3
Connection to a TV or VCR equipped
with an S-VIDEO IN and/or A/V
input (RCA type) connectors
Yellow: VIDEO
White: AUDIO L
Red: AUDIO R
1
CONNECT AC CHARGER STATION
TO TV OR VCR
Connect as shown in the illustration 1, 2 or 3
( pg. 54, 55).
If Using A VCR . . . go to step 2.
If not . . . go to step 3.
2
CONNECT VCR OUTPUT TO TV
INPUT
Refer to your VCR’s instruction manual.
3
TURN ON POWER
4
SELECT TV’S VIDEO MODE
Set the TV to the channel or mode appropriate
for video playback.
To choose whether or not the following displays
appear on the connected TV . . .
•Date/Time, Time Code
.... set to “ON” or “OFF” in the Playback Menu
(
pg. 50).
•Playback Sound Mode Display
.... set the Power Dial to “
M
”, press the MENU
button, and set “ON SCREEN” in the Date/
Time Menu (
pg. 11) to “ON” or “OFF”.
Then set the Power Dial back to “PLAY”.
NOTES:
Never connect any VIDEO/AUDIO cable or S-
VIDEO cable other than those provided to the
AC Charger Station’s connectors.
When using the provided VIDEO/AUDIO cable,
S-VIDEO cable or editing cable, make sure you
connect the end of the cable with the core filter to
the camcorder. The core filter improves perform-
ance of equipment.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
To keep the camcorder's display from appearing
on the TV screen during playback, press the
IND.ON/OFF button for longer than 1 second.
Set the VIDEO OUT select switch of the cable
adapter as required:
Y/C: When connecting to a TV or VCR which
accepts Y/C signals and uses an S-VIDEO cable.
CVBS: When connecting to a TV or VCR which
does not accept Y/C signals and uses an audio/
video cable.
( )
connect when the S-VIDEO
cable is not used
S-VIDEO cable
(provided)
To VIDEO OUT
connector
To VIDEO IN
connector