Filter
Top Products
MENUS FOR DETAILED ADJUSTMENT
36 EN
MasterPage: Left
[ ] = Factory-preset
SOUND MODE and NARRATION
During tape playback, the camcorder detects the
sound mode in which the recording was made,
and plays the sound back. Select the type of
sound to accompany your playback picture.
According to the menu access explanation on
page 32, select “SOUND MODE” or
“NARRATION” from the Menu Screen and set it
to the desired parameter.
The setting below are effective only for video
playback except “BRIGHT”, “16:9” and “REC
MODE”.
The parameters (except “OFF” in ON SCREEN,
SOUND MODE and NARRATION settings) are
the same as in the description on page 33, 35.
Allows you to set the video recording mode (SP
or LP) depending on your preference.
*SP indicator does not appear on the screen.
[STEREO ]: Sound is output on both “L” and
“R” channels in stereo.
SOUND L : Sound from the “L” channel is
output.
SOUND R : Sound from the “R” channel is
output.
[OFF]: Original sound is output on both “L” and
“R” channels in stereo.
ON: Dubbed sound is output on both “L” and “R”
channels in stereo. (੬ pg. 46)
MIX: Original and dubbed sounds are combined
and output in stereo on both “L” and “R”
channels.
੬ pg. 18, “Brightness Adjustment Of The
Display”
[OFF]: The DATE/TIME does not appear.
ON: The DATE/TIME is always displayed.
When set to “OFF”, the camcorder’s display
disappears.
੬
pg. 22, “Time Code”
To enable your tv to display images in 16:9 wide
mode, set the tv screen size correctly.
[4:3TV]: For TV with an aspect ratio of 4:3.
16:9TV: For TV with an aspect ratio of 16:9.
Playback Menus
REC MODE [SP]* / LP
SOUND MODE
NARRATION
SP
LP
BRIGHT
DATE/TIME
ON SCREEN OFF / [LCD] / LCD/TV
TIME CODE [OFF] / ON
16:9
TV
GR-D370AH_EN.book Page 36 Monday, April 17, 2006 2:24 PM