Filter
Top Products
31
Switching between the LCD Screen
and Viewfinder Display
When the LCD+VF item in the LCD/VF[4/4] menu is set to
OFF, the LCD monitor and viewfinder (VF) displays are as
shown below.
MEMO
• You can switch between the LCD monitor and the view-
finder by holding down the DISPLAY button for about 2
seconds.
• After you set up the function that switches the display
between the LCD monitor and the viewfinder by holding
down the DISPLAY button, the display mode is cancelled
by the LCD monitor open/close and normal/inverted
operations.
• If the LCD monitor is closed inside this device with the
screen in the normal display orientation, holding down
the DISPLAY button does not work.
When the LCD+VF item in the LCD/VF[4/4] menu is set to
ON, the LCD monitor and viewfinder (VF) displays are as
shown below.
MEMO
• Press the DISPLAY button for 2 seconds to switch the
LCD screen display ON and OFF.
• The viewfinder screen is always displayed.
SAFETY ZONE 2.35:1CE 2.35:1CH
CENTER MARK OFF ON OFF ON
DV-60I
DV-50I
DV-24P
DV-24PA
DV-25P
4:3 Cannot be selected
16:9
HDV-HD60P
HDV-HD50P
HDV-HD30P
HDV-HD25P
HDV-HD24P
[16:9]
LCD Monitor Status LCD Display VF Display
LCD Closed Normal LCD OFF ON
Inverted LCD ON OFF
LCD Open Normal LCD ON OFF
Inverted LCD ON OFF
LCD Monitor Status LCD Display VF Display
LCD Closed Normal LCD OFF ON
Inverted LCD ON ON
LCD Open Normal LCD ON ON
Inverted LCD ON ON
DISPLAY button
Normal LCD
Inverted LCD
LCD open 40° or
more
LCD close less
than 40°
e_hd250.book Page 31 Tuesday, October 24, 2006 3:11 PM