Filter
Top Products
65
Recording Composite
Video Signals from an
External Device
This device features an AUX IN terminal and can record
composite video signals from external devices.
Connection
Input analog composite video signals from an external
device to the GENLOCK/AUX IN terminal.
MEMO
Input composite video signals with no jitter.
Input level: 1.0V ± 0.3V (p-p)
Setting
Set this device to camera mode:
If the VTR indicator is lit, press the [CAM/VTR] button and
turn off the indicator.
Set the GENLOCK/AUX IN switch to AUX IN.
Set REC on the VIDEO FORMAT[1/2] menu screen as fol-
lows.
U model: DV-60I
E model: DV-50I
Set SET UP item on the VIDEO FORMAT[2/2] menu
screen as follows. (Only for U model)
ON :Set to this when input analog signals include the
setup signal.
OFF : Set to this when input analog signals do not include
the setup signal.
Operation
Start and stop recording with the REC/VTR trigger button.
• EE images of input signals are output in DV-60I (U
model) or DV-50I (E model) formats from the various
image output terminals.
CAUTION
• Recording cannot be checked using the lens RET button
when recording external image signals.
• Do not touch GENLOCK/AUX IN switch during record-
ing.
Status Screen Display on the LCD Screen
or Viewfinder
• “AUX” is displayed at the top left with signal format (DV60I
or DV50I).
IEEE 1394
CH2-AUDIO OUT-CH1 VIDEO
GENLOCK/AUX IN switch
GENLOCK/AUX IN terminal
DV-60I AUX
“AUX” display “AUX” display
STATUS 0 screen STATUS 1 screen
DV-60I AUX
12.0
e_hd250.book Page 65 Tuesday, October 24, 2006 3:11 PM