Filter
Top Products
105
Outputting Color Bars
GY-HD250/GY-HD251 can output three types of color bars,
depending on the camera settings.
To output color bars, make the following settings.
1. Turn the FULL AUTO switch to “OFF”.
2. Set the BARS item on the CAMERA OPERATION menu
screen to “ON”. X See page 80.
• Color bars are output.
Outputting color bars using the USER buttons
1. Turn the FULL AUTO switch to “OFF”.
2. Assign “BARS” to one of the USER1, 2 or 3 buttons.
X See “SWITCH MODE Menu Screen” on page 86.
3. Press the USER button to which “BARS” was assigned.
• Color bars are output.
MEMO
• You can select whether to output an audio test signal
during color bar output using the TEST TONE item on
the AUDIO/MIC[1/2] menu screen. X See page 87.
• Color bars are not output when FULL AUTO mode is ON
or in VTR mode.
NTSC standard : Outputs color bars compliant with the
SMPTE standard.
PAL standard : Outputs color bars compliant with the
EBU standard.
16:9 screen : Outputs multi-format color bars.
FULL AUTO switch
USER button
e_hd250.book Page 105 Tuesday, October 24, 2006 3:11 PM