Filter
Top Products
CONTROLS, INDICATORS AND CONNECTORS
22
Indications on the LCD
Monitor and in the View-
finder
In addition to showing the EE image and the playback pic-
ture, the LCD monitor and viewfinder are also used for the
following character displays.
To show characters on the LCD monitor, press the DISPLAY
button briefly.
Status screens (screens for checking the current cam-
era settings)
Auto white display (only displayed in the Camera
mode)
Menu setting screens
Alarm message display
Safety zone display (only displayed in the Camera
mode)
MEMO
When ANALOG OUT CHAR. on the OTHERS[1/2] menu
screen is ON, characters are also shown on images from
the Y/PB/PR OUT and VIDEO OUT terminals.
Characters are also shown on images from the HD/SD-SDI
OUT terminal when the SDI OUT CHAR. is ON.
Status Screens
Press the STATUS button while normal screen is displayed
to show one of the status screens.
The contents of the status display are divided into those for
the Camera mode and those for the VTR mode.
• Each time the STATUS button is pressed in the Camera
mode, one of 5 status screens is displayed. (STATUS 0, 1,
2, 3, 4)
• One type of screen is displayed in the VTR mode.
• CAMERA MODE (display example)
MEMO
• When the STATUS button is pressed for 1 second or
longer, the menu setting screen is displayed.
To display the Status screen while the menu setting
screen is displayed, press the STATUS button to return
to the normal screen.
• You can switch between the LCD monitor and the view-
finder by holding down the DISPLAY button for about 2
seconds. (When the LCD+VF item on the LCD/VF[4/4]
menu screen is set to OFF.)
DISPLAY button
USER 3USER 2USER 1
STATUS
MENU
2
1
ND FILTER
SHUTTER
STATUS button
STATUS 1STATUS 0
STATUS 2
STATUS 4
STATUSSTATUS 3
•VTR MODE
(display example)
e_hd250.book Page 22 Tuesday, October 24, 2006 3:11 PM