Filter
Top Products
PREPARATIONS
34
About the Viewfinder Cable
Attach the viewfinder cable to the clamp 7 on page 14.
To reduce the emission of unwanted radio waves, be sure to
attach the provided core filter as shown in the figure below.
• Attach the core filter (black) as close to this device as pos-
sible, as shown in the figure.
Inserting an SD Memory
Card
By using an SD memory card, you can save and call up menu
settings and camera settings for GY-HD250/GY-HD251.
X See “FILE MANAGE Menu Screen” on page 100.
Check that the POWER switch is OFF.
Inserting an SD Memory Card
1. Open the SD memory card cover.
2. Face the cutout end of the SD memory card inward and
insert it in the direction of the arrow.
CAUTION
Be sure not to touch the metal connector area of the SD
memory card.
3. Close the SD memory card cover.
Taking out the SD memory card
1. Push the SD memory card in the direction of the arrow.
• The SD memory card comes out slightly.
2. Pull the SD memory card straight out.
About SD Memory Cards
• When you use an SD memory card that was either just
purchased or formatted on a device other than GY-HD250/
GY-HD251, format it on GY-HD250/GY-HD251.
X See page 102.
Recommended SD memory cards
Panasonic: 16 MB to 2 GB
• You can write-protect the card so that saved files are not
mistakenly erased. Set the switch on the side of the SD
memory card to the “LOCK” position.
MEMO
SDHC-compliant memory cards cannot be used with this
device.
Core filter (black)
SD memory card cover
Cutout
LOCK switch
e_hd250.book Page 34 Tuesday, October 24, 2006 3:11 PM