Filter
Top Products
77
VIDEO FORMAT[1/2] Menu
Screen
The VIDEO FORMAT menu screen consists of two screens (1/2 screen, 2/2 screen).
In VTR mode, this screen consists of one screen.
* This is not displayed in VTR mode.
Item Function/Setting (bold characters indicate initial settings)
FRAME RATE Sets the frame rate for shooting.
U model
60/30 : Shoots at 480/60i, 720/60p, 720/30p.
50/25 : Shoots at 720/50p, 720/25p.
24 : Shoots at 480/24p (2:3:2:3 pulldown), 480/24p advance mode (2:3:3:2 pulldown), 720/24p.
E model
60/30 : Shoots at 720/60p, 720/30p.
50/25 : Shoots at 576/50i, 720/50p, 576/25p, 720/25p.
24 : Shoots at 720/24p.
CANCEL : Cancels the settings.
EXECUTE : Executes the settings.
MEMO
• If you change the FRAME RATE item setting, the system is rebooted. X See page 54.
• The cursor (K) does not move to this item when this device is in VTR mode or is ejecting a tape.
1080I CAMERA* Selects whether or not to output camera images in HDV1080i signals. HDV1080i signals are output from component
output of the Y/P
B/PR terminal or HD/SD-SDI output terminal. However, they are not recorded on this device.
OFF : No HDV1080i signal is output. Output setting of camera images is based on the REC settings below.
ON :HDV1080i signal is output. (60/30 Frame rate: 1080/60i, 50/25 Frame rate: 1080/50i)
480/60i or 576/50i signals are output from the VIDEO OUT terminal.
• ON/OFF is set when the SHUTTER dial is pressed.
MEMO
• Tape recording and IEEE1394 output are not available when this is ON.
• REC item cannot be set when this is ON.
• The cursor is positioned on 1080I CAMERA in the VIDEO FORMAT[1/2] menu screen when this is ON.
• When the FRAME RATE is set to 24, this is fixed to OFF.
REC* Sets the video format for shooting. (Can only be displayed and set in camera mode)
You can set the following according to the FRAME RATE.
CANCEL : Cancels the settings.
EXECUTE : Executes the settings.
MEMO
• The synchronous video signal is momentarily disturbed when the REC item setting is switched.
• On the E model, the video format is fixed at HDV-HD24P when the FRAME RATE item is set to “24”. “[HDV-
HD24P]” is displayed.
Setting Description FRAME RATE
DV-60I DV format Shoots using a 480/60i signal. (U model Only)
60/30HDV-HD60P HDV format Shoots using a 720/60p signal.
HDV-HD30P HDV format Shoots using a 720/30p signal.
HDV-HD50P HDV format Shoots using a 720/50p signal.
50/25
HDV-HD25P HDV format Shoots using a 720/25p signal.
DV-50I DV format Shoots using a 576/50i signal. (E model Only)
DV-25P DV format Shoots using a 576/25p signal. (E model Only)
DV-24P DV format Shoots at 480/24p (2:3:2:3 pulldown). (U model Only)
24DV-24PA DV format Shoots at 480/24p (2:3:3:2 pulldown). (U model Only)
HDV-HD24P HDV format Shoots using a 720/24p signal.
e_hd250.book Page 77 Tuesday, October 24, 2006 3:11 PM