JVC GY-HM100U Camcorder User Manual


 
72
Others
Warning Displays
Display Action Page
CHECK LENS COVER Open the lens cover.
20
SET DATE/TIME! Set the date and time.
Using an AC adapter, charge the camcorder for over 24 hours, then set the date
and time.
21
-
COMMUNICATING ERROR Attach the battery again.
19
CANNOT USE IN VIDEO MODE Replace the SD card.
(Make use of an SDHC card (Class 6 or higher) when shooting videos.)
23
CANNOT USE IN STILL IMAGE
MODE
You have pressed a button that does not function in the still picture shooting
mode.
-
FORMAT ERROR! Check the operating procedure, and perform the steps again.
Turn off and on the power of the camcorder.
-
PLAYBACK FAILED
20
CANNOT RECORD Turn off and on the power of the camcorder.
Shooting may not be possible due to the nature of the card.
Check whether the card is a recommended SD card (Class 6 or higher)
Erase the contents of the SD card (DELETE, FORMAT)
7
51, 63
MEMORY CARD ERROR! Turn off and on the power of the camcorder.
Remove and re-insert the SD card. (SDXC cards are not supported.)
Remove any dirt from the SD card terminals.
Insert the SD card before turning on the power.
If the error is not resolved, back up the card and format it. (All data will be
erased.)
20
23
-
-
63
NOT FORMATTED Select [OK] and then [YES] when [DO YOU WANT TO FORMAT?] appears.
24
UP TO 3 STILL IMAGES CAN BE
TAKEN DURING RECORDING
Stop video shooting, then record a still image.
Set the POWER/MODE switch to the still picture mode, then record a still
image.
29
25
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
Stop video shooting, and then record a still image.
When the [SYSTEM SELECT] menu is set to [720-**], still pictures cannot be
captured.
29
-
RECORDING FAILURE Turn off and on the power of the camcorder.
20
VIDEO MANAGEMENT FILE IS
DAMAGED, RECOVERY IS
REQUIRED TO RECORD/
PLAYBACK, RECOVER?
Select [OK] to start recovery.
Even when [OK] is selected, the recovery request message may be displayed
repeatedly. In this case, switch to the EE screen and format the SD card. All
data will be deleted.
-
-
UNSUPPORTED SCENE! Use files that are recorded using this camcorder. (Playback of files recorded by
other models may fail.)
-
CHECK CARD'S WRITE CHECK
CARD'S WRITE
Turn off the write protection switch on the SD card.
-
INSUFFICIENT SPACE Delete unwanted files, or move the files to a PC.
Replace the SD card with a new one.
51
23
NUMBER OF FOLDERS
OVERFLOW
UPPER LIMIT OF
RECORDABLE NUMBER OF
FOLDERS/FILES HAS BEEN
REACHED
The total number of QuickTime and MP4 folders on the SD card has reached 600
and recording cannot be performed. At times like this, perform any of the following
operations.
Move the recorded videos to a PC to free up space on the SD card.
Erase all recorded videos by selecting [FORMAT] in the [MEDIA SETTINGS]
menu.
-
24
NO FILES No still pictures have been recorded. Set the POWER/MODE switch to the
video mode.
25
(12 HOURS LIMITATION)
RECORDING CANCELLED
Resume shooting after a short while. (Shooting stops automatically when it is
performed continuously for more than 12 hours.)
-
M9H7_EN.book Page 72 Thursday, March 26, 2009 2:07 PM