JVC GY-HM700U Camera Accessories User Manual


 
31
This camera recorder saves the recorded images and audio
sound on the SDHC card (sold separately) in the card slot.
Memo :
If the SDHC card contains files recorded by devices other
than this camera recorder or files that are saved from a
PC, the recordable time may be shorter or data may not be
properly recorded.
SDHC Cards to Use
Use a Class 6 SDHC card (4 GB - 32 GB).
Note :
Using cards other than those from Panasonic, TOSHIBA
or SanDisk may result in recording failure or data loss.
Inserting an SDHC Card
This camera recorder comes with two card slots for video/
audio recording and playback (Slot A and B).
1 Slide the SDHC card cover knob of the desired slot in
the direction of the arrow and open the cover.
2 Insert an SDHC card with the notched corner first.
3 Close the SDHC card cover.
Card Slot Status Indicator
The following table shows the respective states of slot A and B.
Removing the SDHC Card
1 Check that the SDHC card to be removed is not being
accessed (lights up in red).
2 Slide the SDHC card cover knob in the direction of the
arrow and open the cover.
3 Push the SDHC card and remove it from the slot.
4 Close the SDHC card cover.
Memo :
When both slots are inserted with usable SDHC cards, the
previously selected slot is used.
Note :
Data may be lost if you turn off the power of the camera
recorder or remove the SDHC card when it is being
accessed. All data recorded on the card, including the file
that is being accessed, may be corrupted. Be sure to check
whether the status indicator is lighted in green or not before
you turn off the power or remove the SDHC card.
If you mistakenly remove the card when it is being accessed,
reinsert the card only after the status indicator goes off.
The SDHC card may not be recognized if you insert and
remove the card within a short time. When this happens,
remove the card and wait for a few seconds before you
reinsert.
SDHC Cards
SDHC Card Cover Knob
[SLOT
SELECT]
Button
Slot A Status
Indicator
Slot B Status Indicator
SDHC
Card
Cover
1
2
3
SDHC Card
Notched Corner
Lamp Slot Status
Lights up in red Inserted SDHC card is being accessed.
(writing/reading data)
Do not turn off the power of the camera
recorder or remove the SDHC card.
Lights up in green On standby. Inserted SDHC card can be
used for recording or playback.
Light goes out SDHC card is not inserted.
An unusable card is inserted.
An SDHC card is inserted but a different
slot is selected.
2
3
4