JVC GY-HM700U Camera Accessories User Manual


 
53
Note :
During Clip Review, only the [CANCEL] and [REC] buttons
are enabled. Press the [CANCEL] button to cancel clip
review and return to
A
STBY
B
(recording standby) mode.
Press the [REC] button to cancel clip review and enter
recording mode. It will take some time to start recording after
the button is pressed.
When the last clip is less than 5 seconds, the whole clip is
played back.
Only video clips in the currently selected slot can be
reviewed.
When there are no clips in the selected slot, Clip Review
function is disabled.
Clip Review is unavailable when Clip Continuous REC is
paused (STBY
C
, red text) . To operate Clip Review, use the
[CANCEL] button to set to
A
STBY
C
B
(white text) first.
(
A
Page 55)
Clip Review is unavailable when the camera recorder is
connected to an external equipment and the equipment is in
recording state.
You can assign functions to the [USER1], [USER2], and
[USER3] buttons.
By assigning functions to the [USER1], [USER2], and
[USER3] buttons, the usability of the camera recorder is
enhanced.
1 Assign functions to the [USER1], [USER2], and
[USER3] buttons from the menu. (A Page 74)
Set each of the [USER1], [USER2], and [USER3] items in
the [Main Menu]B[Camera Function]B[Switch Set...] menu.
Memo :
Operations of the [USER1], [USER2], and [USER3]
buttons are interlocked with the menu settings.
When the menu screen is displayed, these buttons
function as the menu operation buttons. ( A Page 66
[Basic Operations in Menu Screen])
Assigning Functions to
User Buttons
[USER1], [USER2], [USER3]
Buttons