Filter
Top Products
28
1.
Press and hold the MENU button for about 3 seconds to
display the SETUP screen.
2.
Select CAMERA and press the SET button.
The menu screen for the connected cameras is displayed.
5. MENU SCREEN SETUPS
CAMERA SCREEN
To set up the connected cameras, please refer to the instruction manuals of the individual cameras.
Use the following procedure to display the menu.
1.
Press and hold the MENU button for about 3 seconds to
display the SETUP screen.
2.
Select CONTROL UNIT and press the SET button.
The CONTROL UNIT screen is displayed.
3.
Select an item in the CONTROL UNIT screen using the
PAN/TILT control lever.
Pressing the SET button displays a sub-menu at a lower
hierarchical level.
Pressing the MENU button displays a menu at a higher
hierarchical level.
Sub-menu details
OPTION : Used for settings related to the remote control
system.
REF. : Page 29.
DATA I/O : Used for settings related to the DATA I/O ter-
minals on the rear panel.
REF. : Page 30.
ALARM : Used for settings related to the ALARM.
REF. : Page 32.
AUTO SEQUENCE :Used for settings related to the
AUTO SEQUENCE operation which
is activated by pressing the AUTO
button.
REF. : Page 32.
CONTROL UNIT SCREEN
This screen is used to set the functions of the remote control unit.