JVC VF-HP840U Camera Accessories User Manual


 
13
MARKER SETTING Menu Screen
Settings in bold are factory default settings.
Item Setting ValueDescription
ASPECT TYPE VIDEO
CINEMA
This item sets the purpose of the marker.
VIDEO : Aspect for TV broadcast shooting
CINEMA : Aspect for cinema shooting
Note
When the input format is 4:3,
A
CINEMA
B
cannot be selected.( [VIDEO] is displayed.)
RATIO When ASPECT
TYPE is set to
AVIDEOB
16:9
4:3
14:9
16:9+4:3
This item sets the aspect ratio of the marker. It displays the configured aspect
ratio of the marker. When set to A16:9+4:3B, the 16:9 and 4:3 marker are
displayed at the same time.
Note
A16:9+4:3B is displayed when the VIDEO FORMAT at the camera is HD
mode.
When ASPECT
TYPE is set to
ACINEMAB
2.35:1
1:66:1
1:75:1
1:85:1
POSITION CENTER
C.HEADRM
This item sets the display position of the marker.
CENTER : Sets the display position of the marker at the center of the screen.
C.HEADRM : Sets the display position of the marker at the upper side of the screen.
Note
AC.HEADRMB can only be set when [RATIO] is A2.35:1B or A1:85:1B. For
other settings, [CENTER] will be displayed and setting is disabled.
ASPECT MARKER OFF
ON
This item sets the marker outside the aspect area.
OFF : Cancels the marker outside the aspect area.
ON : Displays the marker outside the aspect area.
Note
When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
TYPE LINE
HALFTONE
LINE+HALF
This item sets the type of labeling for markers outside the aspect area.
LINE : Displays the aspect area in lines.
HALFTONE : Displays the image level outside the aspect area in half the
brightness.
LINE+HALF : Displays the aspect area in lines and sets outside the area
in half the brightness.
SAFETY ZONE OFF
ON
This item sets the marker inside the aspect area.
OFF : Cancels the marker inside the aspect area.
ON : Displays the marker inside the aspect area.
Note
When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
The above feature may not function depending on the version of the
camera's software. For details, please consult JVC's authorized dealers.
SIZE 95 %,
93 %, 90 %
88 %, 80 %
This item sets the display percentage for markers inside the aspect area.
CENTER MARK This item sets whether to display markers in the center.
OFF : Cancels the center marker.
ON : Displays the center marker.
Note
When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set SAFETY ZONE at the camera to
AOFFB. Settings at VF will be invalid.
When camera output is set to BARS, this function is AOFFB during Return
Video display, 1:1 display and when status display is OFF.
PAGE BACK ^ This returns to the [MAIN MENU] screen
VF-HP840U_EN.book Page 13 Thursday, January 17, 2008 2:48 PM