JVC VF-HP840U Camera Accessories User Manual


 
8
Getting Started
I [TALLY] Switch
This turns ON/OFF the TALLY lamp M.
ON : TALLY is enabled.
OFF : TALLY is disabled.
Note
The TALLY lamp H at the screen operates regardless of this
switch.
J [DC INPUT] Terminal (XLR type, 4-pin)
This product can operate by connecting to an external power
supply of DC 12 V. (When this product is connected to
KA-HD250U, this terminal does not have to be connected to an
external power supply.)
K [RETURN] Input Terminal
This is an input terminal for composite video signals or
component (Y only) signals. It connects the return video
signals.
Note
Select the type of return video signals from the [RET VIDEO]
item on the [VIDEO FORMAT] menu screen of this product.
(A Page 15)
B&W screen will be displayed even when composite video
signals are input.
During return video signal display, status display other than
[CAMERA NAME] will be AOFFB.
The above feature may not function depending on the
version of the camera’s software. For details, please consult
JVC’s authorized dealers.
L [VF CABLE] Input Terminal
Connect this terminal to the KA-HD250U VF output terminal
(20-pin) with the provided VF cable.
M TALLY Lamp
This displays the monitor status of the input screen in red.
Only when Tally PGM (Program) signals are input, the lamp
lights up in red.
Note
Use [TALLY] switch I to turn ON/OFF the display function of
this lamp.
N VF CABLE HOLDER
This holder clamps down the provided VF cable when
connecting the cable to the input terminal.
Note
Be sure to secure the VF cable with the holder as it prevents
the cable from slipping during connection. (A Page 9)
O DIP Switch (A Page 17)
Some functions can be specified according to the usage of
individual users.
Note
Use the factory settings when connecting to the GY-HD250U
with KA-HD250U system.
Names and Functions of Parts
(Rear)
DC INPUT
RETURN
VR CABLE TALLY
ON
OFF
I
L
K
J
M
N
O
VF-HP840U_EN.book Page 8 Thursday, January 17, 2008 2:48 PM