Filter
Top Products
Page - 6
Using the KiWi™
REMOVING THE FRICTION CAP
The KiWi+ needs to be disassembled in order to install or change
detent discs. The detent discs come in various settings and pro-
vide the different angular click-stops. (NOTE: See Disc Selec-
tion Chart In Appendix A).
To start, the friction cap must be removed. Loosen the knob
located on the side of the friction cap. It does not have to be
removed from the cap, but just backed out far enough so that
the cap can be unscrewed from the axle. Unscrew the cap. At-
tached to the cap is a rubber washer with a nylon facing.