Filter
Top Products
Page - 10
The spring plunger that provides the detent action can also be
adjusted to vary the force of the click action. Use a flat blade
screw driver to move the plunger in and out as desired. A con-
venient way to adjust the plunger is to screw the plunger all
the way in, until it bottoms out. Then unscrew the plunger about
one turn.
Once the indexing hub is removed, the detent disc can be re-
moved from its recess in the bottom of the horizontal
bracket.The disc may slip out once the indexing hub is removed.
If it sticks inside the recess, simply insert the tip of a small ball
point pen or a pin into the detent disc ejection hole on top of the
bracket and push the disc out of the detent disc recess.
Removing the Detent Disc