Filter
Top Products
22 Chapter 3 Getting Started
2 Insert the SD card into the socket on the front of the
docking station. Without the SD card, or if the card is full,
the docking station can store the last 12 images. When the
card is inserted, the images are transferred automatically to
the card.
3 Select the correct video cable and connect to the docking
station: VGA (
2), S-video (3), AV-out (4).
4 Connect the other end of the video cable to the monitor.
Caution: Do not remove the SD card while
the docking station is powered on until the
SD card access icon at the lower-right of the
monitor disappears.
5
2
3
4