Filter
Top Products
10 KODAK Display Manager System V4.1 User’s Guide
Installing and Setting Up Your System
IRIX Installation
IMPORTANT
You must be logged in as root (IRIX Operating System) to install the Display
Manager System.
To install the Display Manager System on an IRIX computer, you should be
familiar with the IRIX inst or swmgr command.
The required files can be found on the installation CD in the dist directory or in
the directory where you uncompress the downloaded files. (See Step 1
below.) Make sure that you have the following files:
•kdm
• kdm.idb
•kdm.sw
The IRIX computer must be running IRIX 6.5x with the corresponding version
of NFS.
To install on an IRIX system:
1. Do one of the following:
• Insert and mount the installation CD.
• Uncompress the downloaded installation file.
a) gunzip KDM_V4_Irix.tar.gz
b) tar xf KDM_V4_Irix.tar
2. Launch inst or swmgr.
3. Select the kdm package from the mounted CD-ROM drive or from the
directory containing the downloaded installation file.
4. Complete the installation by following the on-screen prompts.
5. Connect the hardware to your computer. See “Step 2: Connect the
Hardware” on page 12.