Filter
Top Products
KODAK Display Manager System V4.1 User’s Guide 15
Installing and Setting Up Your System
NOTE
On IRIX, do not use serial port 1.
To connect the sensor:
1. Connect the WINDOWS adapter to the sensor cable.
2. Plug the WINDOWS connector into a serial port.
3. Plug the AC adapter connector into the sensor cable.
4. Plug the AC adapter into a power outlet.
During calibration, attach the sensor as shown here, making sure that the
round portion of the sensor is at the top.
Firmly push on the sides of the sensor so that the spring-loaded suction cup
slides forward onto the screen. When the suction cup is firmly in place, release
the sensor.
You may need to moisten the suction cup by wiping it with a tissue lightly
dampened with water, or to fog the suction cup by breathing on it.
You may need to clean the monitor and suction cup, if the sensor does not
firmly attach. Clean the suction cup with a clean dry cloth.
IMPORTANT
Do not apply a cleanser to the suction cup.
To clean the monitor, use a soft, lint-free paper or cloth lightly dampened with
a mild glass cleaner.