Filter
Top Products
36 KODAK Display Manager System V4.1 User’s Guide
Calibration
If your monitor cannot be calibrated, the following message appears. Click
Yes to retry.
You must switch to Manual display mode and manually calibrate your monitor
if it cannot be automatically calibrated. See
“Manual Calibration” on page 36.
Manual Calibration
You can manually calibrate your display by adjusting the white and black
points from your monitor controls.
Use this method to manually calibrate your display if:
• You are using an IRIX system
• You are displaying your images on an HD/SD display
• The enable cable does not recognize your monitor
• You were unable to successfully calibrate your monitor automatically
• You have an LCD monitor
Use the colorbars target provided with your Display Manager System to assist
you in making these adjustments.
If using a digital projector, set the projector to the manufacturer’s defaults.
To manually calibrate a monitor or HD/SD display:
1. Select Manual from the drop-down Display Mode menu, if it isn’t already
selected.