Filter
Top Products
44 KODAK Display Manager System V4.1 User’s Guide
Characterization
Manual Characterization
Use the Manual Characterization Assistant to characterize a display, such as
a digital projector or HD/SD display. Patches for use in characterizing HD/SD
displays and digital projectors are available on the KODAK Display Manager
System CD in the Images/Patches folder or can be downloaded from
http://www.kodak.com/US/en/motion/products/dlmanage/kdmDown.jhtml. The
patches can also be displayed from one of the following KODAK Video Tapes:
• KODAK Display Manager Dual-Length Color Patch Set / D5-HD Tape
#D5C63M, 1080i/50
• KODAK Display Manager Dual-Length Color Patch Set / D5-HD Tape
#D5C63M, 1080i/59.94
• KODAK Display Manager Dual-Length Color Patch Set / Digital BETACAM
Tape #BCT-D64, NTSC
• KODAK Display Manager Dual-Length Color Patch Set / Digital BETACAM
Tape #BCT-D64, PAL
• KODAK Display Manager Dual-Length Color Patch Set / HDCAM Tape
#BCT-64HD, 1080i/50
• KODAK Display Manager Dual-Length Color Patch Set / HDCAM Tape
#BCT-64HD, 1080i/59.94
The tapes contain 15 sec. patches for use with SEQUEL and X-RITE Sensors
and 40 sec. patches for use with the PHOTO RESEARCH PR-650 and
MINOLTA CS-100A Sensors. A slate indicates the start of each patch set.
NOTES:
• If you use a KODAK Video Tape for manual characterization, the
measurements may be automatically entered into the Manual
Characterization Assistant (depending on the device you are using).
• When manually characterizing, you can create and save characterization
templates containing set patches and then load these templates as
needed.
• You can also load a .chr file into the Assistant, if you want to confirm
measurements on a set of patches, or to view data from a previous
characterization.
• If you stop the characterization process before reading all of the color
patches, save your work by going to File > Save Interim
Characterization File. When you restart your work, load this file by going
to File > Load Interim Characterization File.