Filter
Top Products
68 KODAK Display Manager System V4.1 User’s Guide
Verifying
The Verification window opens when the correction is complete.
2. If the sensor is not already in place, position it in the center of the screen.
See
“Step 2: Connect the Hardware” on page 12.
3. Cover the monitor and sensor with a dark cloth if you are not able to turn
off the room lights.
4. Click Verify Monitor Setup on the Verification window.
The Display Manager System projects and measures a series of colored
patches.
When verification is complete, the Verify Monitor Setup button changes
to read Monitor Setup Results and you are notified if verification was
successful.