Filter
Top Products
Taking pictures/videos
www.kodak.com/go/support
11
Using the self-timer
Use the self-timer when you want to be included in a picture, or to ensure a steady
Shutter button press. Place the camera on a tripod or flat surface.
1 Repeatedly press the Self-timer/Burst button to choose a setting:
10 seconds—A picture is taken after a 10-second delay (so you have time to get
into the scene).
2 seconds—A picture is taken after a 2-second delay (for a steady, shutter
release on a tripod).
2 shot—The first picture is taken after a 10-second delay. A second picture is
taken 8 seconds later.
2 Compose the scene. Press the Shutter button halfway, then completely down.
The camera takes the picture/pictures after the delay.
Use the same procedure to take a 2- or 10-second self-timer video, but press the
Shutter button completely down.
Using burst
Use the Burst feature to take up to 3 pictures in quick succession.
NOTE: Burst is unavailable in Portrait, Night Portrait, Night Landscape, Backlight, Fireworks, and
Panorama modes.
1 Repeatedly press the Self-timer/Burst button until the Burst icon appears
on the LCD.
2 Press the Shutter button halfway to focus and set exposure.
3 Press the Shutter button completely down and hold it to take pictures.
The camera takes up to 3 pictures while the Shutter button is pressed.
NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in
Review (see page 19).