Kodak KAF-6303E Digital Camera User Manual


 
PRODUCT SUMMARY
KODAK KAF-6303E IMAGE SENSOR
3072 (H) X 2048 (V) FULL FRAME CCD IMAGE SENSOR
DESCRIPTION
The KAF-6303E is a high performance monochrome area
CCD (charge-coupled device) image sensor with 3072H x
2048V photo active pixels designed for a wide range of
image sensing applications in the 0.3 nm to 1.0 nm
wavelength band. Typical applications include military,
scientific, and industrial imaging. A 74dB dynamic range
is possible operating at room temperature.
The sensor is built with a true two-phase CCD
technology. This technology simplifies the support
circuits that drive the sensor and reduces the dark
mpared to a front side illuminated
n gate technology. The sensitivity is
Medical Imaging
ific Imaging
P Typical Value
current without compromising charge capacity. The
transparent gate results in spectral response increased
ten times at 400nm, co
standard polysilico
increased 50% over the rest of the visible wavelengths.
Total chip size is 29.0 mm x 19.1 mm and is housed in a
26-pin, 0.88” wide DIL ceramic package with 0.1” pin
spacing.
FEATURES
6M Pixel Area CCD
3072H x 2048V (9 µm) Pixels
Transparent Gate True Two Phase Technology
(Enhanced Spectral Response)
2-Phase Register Clocking
100% Fill Factor
Low Dark Current (<10pA/cm2 at 25° C)
APPLICATION
Scient
arameter
Ar Full Frame CCD chitecture
T 3088(H) x 2056(V)) otal Number of Pixels
N
V) = approx.
umber of Active Pixels
3072 (H) x 2048 (
1.6 M
Pixel Size 9 µm (H) x 9 µm (V)
Active Image Size 27.65 mm (H) x 18.48 mm (V)
Chip Size 29.0 mm (H) x 19.1 mm (V)
Saturation Signal 100,000 electrons
Output Sensitivity 10 µV/electron
Qu , 550, 650
nm)
40%, 52%, 65%
antum Efficiency (450
Readout Noise (10 MHz) 15 electrons rms
Dark Current
(T = 25° C, Accumulation Mode)
<10pA/cm
2
Dark Current Doubling Rate 6°C
Dynamic Range (Saturation
Signal/Dark Noise)
76 dB
Maximum Data Rate 10 MHz
Package CERDIP Package (sidebrazed)
Cover Glass Clear or AR coated, 2 sides
www.kodak.com/go/imagers