39 www.kodak.com/go/support
Doing more with your camera
Changing PASM or C mode settings
PASM and C modes control the f-number (aperture), shutter speed, exposure
compensation, and flash compensation.
1 Turn the Mode dial to P, A, S, M, or C.
2 Use the Command dial and Set button:
■ Turn the Command dial to move the selection
arrow between the available settings.
NOTE: See Menu on page 53 for
Advanced picture-taking in PASM and C modes.
■ Press the Set button to open a setting.
■ Turn the Command dial to adjust the setting,
then press Set to close.
3 Press the Menu button to change other settings
(see page 46).
4 Take a picture.
PASM & C mode options
White—selectable
Blue—non-selectable
Yellow—changeable value
Red—out-of-range