Filter
Top Products
43 www.kodak.com/go/support
Doing more with your camera
Using exposure compensation with exposure bracketing
In PAS modes, you can use exposure compensation in conjunction with exposure
bracketing.
Using the command dial for rapid setting changes
Use the Command dial in combination with other buttons for rapid setting changes.
NOTE:
The Command dial is also used to adjust manual settings in PASM modes, see
page 39
.
If exposure
compensation is
set to
And if the exposure
bracketing interval is
set to 3 steps
Then the exposures taken
are
0.0
Set the drive mode to Exposure
bracketing 3 (see page 30).
–0.3, 0.0, +0.3
+1.0 +0.7, +1.0, +1.3
–1.0 –1.3, –1.0, –0.7
Function buttons that provide rapid setting changes:
• Flash button (page 37) • Exposure metering button (page 42)
• Focus button (page 29) • White balance button (page 40)
• Drive button (page 30) • Digital zoom button (page 9)
•ISO button (page 41)
Command dial
• Hold the Function button and
rotate
the
Command dial to
rapid
ly
scroll through and select
an option in the function menu.
• Release the Function button
to close the menu.