Filter
Top Products
73 www.kodak.com/go/support
Troubleshooting
Picture quality problems
If... Try one or more of the following
Picture is too dark
or underexposed
■ Reposition camera for more available light.
■ Use Fill flash (page 37) or change your position so light is not behind
the subject.
■ Move so that the distance between you and the subject is within the
effective flash range (page 10).
■ To automatically set exposure and focus, press the Shutter button
halfway and hold. When the AE/AF indicator turns green, press
the Shutter button completely down to take the picture.
■ Use P mode to adjust the Exposure and Flash Compensations
(page 39).
■ Use P mode (page 39) and Selectable AF Zone (see table on
page 53).
Picture is too light
or overexposed
■ Reposition camera to reduce the amount of available light.
■ Turn flash off (page 10).
■ Move so that the distance between you and the subject is within the
effective flash range (page 10).
■ To automatically set exposure and focus, press the Shutter button
halfway and hold. When the AE/AF indicator turns green, press
the Shutter button completely down to take the picture.
■ Use P mode to adjust the Exposure and Flash Compensations
(page 39).