Filter
Top Products
25
When the film is loaded incorrectly, the frame
counter (“0”) and film transport signals blink
on the data panel, and the shutter is locked.
If the camera is off, the warning is displayed
for approximately five seconds. Open the
back cover and reload the film.
When the film is loaded correctly with the
camera on, the frame counter (“1”), cartridge
mark, and film transport signals appear on
the data panel.
When the film is loaded correctly with the
camera off, the frame counter (“1”), cartridge
mark, and film transport signals appear on
the data panel for approximately five
seconds.
2165_E.qxd 03.2.10 2:06 PM Page 25