LG Electronics N2T2 Security Camera User Manual


 
39
1. Volume format
7
-
4.
System set-up
Hard drive set-up
This chapter gives the information and explains the function of the data
volume the user stores. In order for data to be saved on to LG Network
Storage, volume must be set up. If the volume is not configured, you can-
not connect to the network drive nor use functions such as backing up
using USB or an optical disk.
This product provides the following 5 volume configuration methods for
the user’s requirement
- RAID 0(Stripping)
- RAID 1(Mirroring) for important data
- linear(JBOD) volume
- RAID 1(Mirroring) + RAID 0(Stripping)
- Individual disks(disk1,disk2)
To configure the volume, follow the below procedures. Configuration of the volume will
remove all existing user’s data in the hard disk and will not be recovered.
A
Go to System -> Hard drive ->
Volume tab
The name of the configured vol-
ume and detailed information
will appear. Detailed information
will not appear if volume is not
configured.
B
In the process of volume configuration, the web menu and the buttons in the front will
not be available.
When you first purchase the product, the volume is already organized.
Therefore please use this menu only when you wish to change the volume
organization set-up.
When organizing a volume, certain section of the hard disk is assigned as
a system section of LG Network Storage. Consequently a capacity of the
volume after the volume organization appears smaller than the capacity
of the hard disk.