Lightolier 2003R Indoor Furnishings User Manual


 
Lytecaster
®
Recessed Downlighting 2003R
Page 1 of 1 3 3/4” Aperture 0
®
Incandescent Non-IC Remodeler Frame-In Kit
Frame-in Kit
2
3
5
1
4
11 1/2”
Ceiling Opening
4 1/8”
Top View
Complete Fixture consists of Reflector Trim & Frame-In Kit. Select each separately.
Frame-In Kit Reflector Trims — See Individual Reflector Trim Specification Sheets
Open Downlight
Specular SpecularCone Satin Baffles Pinhole
Reflector Cone
2003R 2045 2012 2013BK 2008 2005 2011 2095 2084CD 2090
2046 2012NM 2013BKNM 2008NM 2005BNM 2096 2084WH
2046CD 2013 2013CD 2010 2005WH 2096CD
2013NM 2013CDNM 2010NM 2005NM
2013WH
Pinhole Open Open Wet Enclosed
Wall Washer Location Diffuser
Features
1. Mounting Ring: .032 (#22 ga.) galvanized steel. Accommodates existing
ceilings up to 2” thick. Attaches securely to any type of ceiling material
without tools using (3) mounting straps provided. Push-in/twist-out clips
hold reflector flush to ceiling. Includes adhesive backed aperture template.
2. Junction Box: 2 1/2” X 2 1/2” X 3 1/2” (21 cu. in.) .032 (#22 ga.) galva-
nized steel. U.L.listed for 90° C supply wire. Integral cable clamps permit
attachment of non-metallic (#12 or #14 ga.) Romex
®
cable without tools or
additional connectors. Attaches to mounting ring without tools.
3. Socket Housing: Impact extruded aluminum or galvanized steel.
4. Socket: Porcelain medium base; nickel plated screw shell. Pre-wired with
#18 ga. SF1 (300 VOLT 200° C) leads to junction box.
5. Thermal Protector: Meets NEC and U.L. requirements. Do not install insu-
lation within 3 inches of fixture sides or wiring compartment nor above fix-
ture in such a manner as to entrap heat.
Options & Accessories
Replacement Clips (Set of 3): 1997
Labels
UL (Suitable for Damp Locations)
Romex
®
is a registered trademark of General Cable Industries Inc.
US & Foreign Patents Pending.
Reflector Trim
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Lightolier a Genlyte company www.lightolier.com
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2006 Genlyte Group LLC • H0806