Filter
Top Products
English - 31
2.1 Press [MENU] on the remote control or control panel to enter
the setting menu.
2.2 Press [] or [] to the [Setting] menu.
2.3 Press [] to enter [Projector Type].
2.4 Press [] or [] to select [LCD/DLP].
2.5 Press [MENU] to exit.
7.20 I would like to resume the factory default settings
(Factory Reset)
7.20.1 Using OSD menu
1. Press [MENU] on the remote control or control panel to enter
the setting menu.
2. Press [] or [] to select [Advance] menu.
3. Press [] to select [Factory Reset].
4. Press [] or [] to select [Yes].
5. Press [ENTER] to activate.
7.20.2 Use Compound Key
1. Use the control panel, and press [ENTER] + [MENU]
simultaneously to restore the initial value.
<Note> Before using the compound keys, please remove all
VGA-IN devices.
7.21 I would like to use a USB disk
1. Insert the USB disk and a [Copy To USB Disk] dialog box will appear,
and you are asked whether to copy files from PC190 to the USB disk.
Press [] or [] on the remote control or control panel
to select.
7.22 Computer-related functions
Ensure that the USB cable is connected and the drivers are installed before
using the computer-related functions. Refer to Chapter 4 Installation and
Connections in this User Manual.
Copy To USB Disk
Yes
No