Filter
Top Products
7SD MEMORYCAM2™
ENGLISH
6. MENU BUTTON:
To enter the menu setting of the SD recorder.
7. MONITOR BUTTON:
To select live image reproduction.
Image 1/image 2/ image 1 in image 2 /image 2 in image 1 monitoring and switching (when two
cameras are connected).
Note:
- The SD recorder records only one selected picture. Therefore, while recording, never use the
picture-in- picture option.
- We do not recommend the use of picture-in-picture when motion detection is on.
8. PLAY BUTTON:
To review the captured pictures or videos.
Press it once to show the latest single image/video; (= reproduction mode)
Press it twice to show the last 6 shots; (= overview mode)
Press it three times to show the file folders by date; (= file folders mode)
Press it a fourth time to go back to the selected channel. (= live mode)
9. QUICK SHOT BUTTON/ DELETE:
This button has got a double function.
1. Press this button to take a quick shot manually.
2. Press this button to delete captured images from the SD card when SD recorder is in the standby
mode.
10. MOTION DETECTION INDICATOR LED:
LED flashes when picture capture is activated.
11. VIDEO CAPTURE ON LED:
LED flashes when video recording is activated.
12. POWER INDICATOR LED:
LED is on constantly when the SD recorder is switched on.
13. SD CARD SLOT:
Insert SD card (max. 2GB) to store the captured pictures/videos.
14. POWER SWITCH:
To turn the SD recorder on/off.
15. TRIGGER MODE:
To switch between motion captured by internal software or external triggering.
16. CH 1 INPUT:
Connection for camera 1.
17. CH 2 INPUT:
Connection for camera 2.
18. VIDEO OUTPUT:
Connection for TV.
19. DC IN 5V:
Connection for power adapter AC 100~240V, output 5VDC 1A.
20. ALARM OUTPUT:
An NO (normally open) output triggering signal will activate external alarms/devices for 10 seconds.
For connections, see specifications of your alarm system.
21. EXTERNAL TRIGGER INPUT:
Accepts triggering signal from external devices such as motion sensors or door contacts to activate
the SD recorder and the image/video recording.
Note: Maximum voltage for external trigger: DC 24V