Filter
Top Products
7. AUTOMATICALLY SWITCHING BETWEEN CAMERA
IMAGES
You can combine up to 4 cameras with one receiver. The receiver will then automatically
switch between the camera images. Every camera should be set to a different channel
number.
You can have the receiver switch between images of multiple cameras by setting more than
one of the channel switches on the receiver to ON. The switch time is 4 or 8 seconds,
depending on the setting of the interval switch (T).
The first 4 switches are for activating channels 1, 2, 3 and 4.
Use the T switch to select an interval time of 4 or 8 seconds.
Examples: Using one camera
Camera Channel 1 activated. The channel indicator on the
receiver will blink once with intervals of 4 seconds.
Camera Channel 3 activated. The channel indicator on the
receiver will blink three times with intervals of 8 seconds.
Using several cameras
Camera Channels 1 and 3 are activated alternately. The interval
time is 4 seconds. The channel indicator on the receiver will blink
once and then three times four seconds later to indicate the
active camera channel.
Camera Channels 1, 2 and 3 are activated alternately. The
interval time is 8 seconds. The channel indicator on the receiver
will blink once, then twice eight seconds later, and eight seconds
later it will blink three times to indicate the active camera
channel.
8 MARMITEK