Filter
Top Products
Press this key on the remote
control....
The screen displays Explanation
26
Time settings
Childlock
Timer recording
Basic setting of MVS
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
Timer/childlock
696+08F-GB
?
MENU
return Help
TV
picture
8.1 Childlock
Switching on
Your TV set can be protected against unauthorized use. It is possible to prevent any use of the television at all or to permit viewing of up to
five specific programmes. Consequently, the childlock can be set to prevent a child from seeing violent films, yet still provide access to
children’s programmess on selected channels. Access to such permitted programmes can be provided in general or within a specified
period of time.
Example:
The children shall only be allowed to watch programmes on the programme positions 01, 02 and 05 from 14.00 to 18.00 hr. Access to all
other programme positions shall be excluded.
1. Call the „Timer/childlock“
menu
2. Call the „Childlock“
submenu and switch on
the childlock
3. Select and store permitted
programmes
AV
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
Childlock
696+08G1-GB
-- -- -- -- --
----
--
:
--
--
:
--
Childlock. . . . .
Permitted programmes:
Enter code . . . . :
Begin viewing . :
End viewing . . . :
On
?
MENU
return Help
TV
picture
AV
OK
P
+
+
-
AV
--/-
-
P
123
456
789
0
A
B
TV
?
MENU
Childlock
696+08H1-GB
01 02 05 -- --
----
--
:
--
--
:
--
Childlock. . . . .
Permitted programmes:
Enter code . . . . :
Begin viewing . :
End viewing . . . :
On
?
MENU
return Help
TV
picture
store ?
OK
The childlock can be switched on and off with the
keys.
If you set the childlock to „ON“, you must also enter a
4-digit personal code number.
The TV set can now still be switched on, but programmes
will not be shown on the screen. Instead the „Childlock“
menu will be displayed with the cursor on the „Enter
code“ line.
The childlock can be turned off again by entering the
4-digit personal code number.
The TV is automatically switched to standby mode after
approx. 10 minutes if it has not been switched off
manually in the meantime.
+
-
A maximum of 5 programme positions can be entered
to which access is permitted.
These programme positions are entered with the
numeric keys; all entries can be erased with the C key.
Back to the example:
Enter the programme positions which are to be
accessible. In this example, the programme positions
01, 02 and 05 have been entered.
Before continuing with the next programming steps,
the permitted programme positions entered above
must be stored; otherwise the entries will be lost.
MENU
0
1 2 3
4 5 6
7 8 9
OK
yellow
yellow
blue
green
-
+